T O P
AutoModerator

Hello /u/Will2025, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*


Senior_Ad1636

It's a classic sign of hot plastic being put on top of hot plastic, add a minimum layer time in the slicer. You'll have to play around to get the right time though.


Will2025

It will definitely differ, but what roughly would you recommend?


Senior_Ad1636

Time the layers around the steering wheel to get the right time. I don't print much in tpu so I'm not sure. The other solution is more part cooling, either up the fan if it isn't on 100% already or upgrade them to bigger/better ones


Will2025

Well this is tpu, and from my research the fan should be pretty low, but I'll look into layer time, thx